User Guide

MultiSITE CRC 1 Controller

Due to our policy of continuous product innovation, some specifications may change without notification.

CONFIGURATION SCREENS

More Screens – continued

Press the right arrow button to display these screens. To adjust vane angle, user selects vane(s) by tapping

vane icon at the top of the screen, adjusts vane angle by using up/down arrows and then selects Apply button.

Note:

Vane xed angle control for multi-vane systems occurs in pairs. Refer to the Vane Fixed Angle screen. If a 4-louver

device is identied, when the user chooses Vane 1 or Vane 3 control, the opposite vane (Vane 3 or Vane 1) will be

controlled at the same time. If Vane 2 or Vane 4 is selected, Vane 4 or Vane 2 will be controlled in lockstep with its

matching pair as well. The same control behavior holds for a 2-louver device.

Off(0)

Vane Direction

Airflow Up/Down

Off(0)

Airflow Left/Right

Off(0)

Airflow Circular

Apply

Default

ALL

Vane Fixed Angle

Airflow Up / Down and

Airflow Left / Right con-

trols can both be “On” at

the same time. However,

when Airflow Circular

control is “On,” both of

the other two controls will

be set to “Off.”

Conguration Parameters Default Value Parameter Settings

Airow Up / Down

Default value: Off

Choices: 0 = “Off”, 1 = “On”

Airow Left / Right

Default value: Off

Choices: 0 = “Off”, 1 = “On”

Airow Circular

Default value: Off

Choices: 0 = “Off”, 1 = “On”