Integration Manual


 14/16

Output: disconnected, connecting or Connected。
5.wlan-info(Display the information of the current wlan, include SSID, Encryption, IP address)
Input:*AT*wlan-info*
Output:
◆(If the profile name=Provisioning, SSID= PROV-24-A6-90, Then output:)
+wlan-info:OK
Profile: provisioning
SSID: PROV-24-A6-90
BSSID: 5C:DA:D4:24:A6:90
channel: 11
mode: adhoc
security: WEP (shared)
address: STATIC
IP:192.168.10.1
gateway:192.168.10.1
netmask:255.255.255.0
dns1:192.168.10.1
dns2:192.168.10.1
◆(If disconnected to AP, Then output:)
Not connected
6. wlan-mac(Demand the MACID)
Command format:*AT*wlan-mac *
Input:*AT*wlan-mac *
Output:5C:DA:D4:24:A6:90
7. wlan-gethostbyname (Parse Hostname)
Command format:*AT*wlan-gethostbyname*<hostname>*
Input:*AT*wlan-gethostbyname demo90.myit-school.net*
Output:202.181.196.246
8.Baud rate config of serial interface
Input:
*AT*UARTCFG*?*(Demand the current baud rate)
*AT*UARTCFG*9600*(Set the baud rate: 9600)
*AT*UARTCFG*115200*(Set the baud rate: 115200)
9. System reset
Input:*AT*RESET**
*AT*RESET*1*