Integration Manual

The device is intended only for OEM integrators under the following conditions:
(1) According to FCC Part 15 Subpart C Section 15.212, the radio elements of the
modular transmitter must have their own shielding. However, due to there is no
shielding for this WIFI module, the integrator has to perform radiated measurements
of the host device with the integrated WIFI module to assure compliance with the
FCC regulations.
(2) According to FCC Part 15 Subpart C Section 15.212, the radio elements of the
modular transmitter must have their own power supply. However, due to there is no
own power supply for this WIFI module, the host device must support the module
with a stable 3.3V voltage power.
As long as 3 conditions above are met, further transmitter test will not be required.