User's Manual

Setting up the LightPRO network (2)
-
Jennet-IP network formation
Step 4 Add Remote to Jennet-IP network
Initiatetheactivemodeoftheremotebypressing“PRGbutton‐>Upbutton‐>Downbutton‐>Upbutton”.
Refreshthepageof“Jennet‐IP”‐>“Whitelist” tabuntiltheremoteshowsup
Ticktocheckboxoftheremoteandclick“Save&Apply”
RepeatStep4toaddmoreremotes
July 25, 2014Subject / Department / Author -
8