User's Manual

7
Insert Memory Card
Wireless Spy Fishing Camera (Receiver) - RX
Prior to the use of the device,
it is required to insert a memory card
in order to use the video
recording and photo
shooting function.
Please hold the edge of Micro SD card and please be aware of the
label direction. Insert the card with the connector end toward
the slot until the memory card is secured inside the slot.
To remove the card, grab the edge of the card, and pull the card
out.
HDMI
Micro SD
Type C
ON OFF
HDMI
Micro SD
Type C
ON OFF
Note:
․ Prior to the use of the device, please format the memory card rst in order to prevent any
system instability due to le not recorded by the present device.
․ When the device is under the turn-on state, please do not remove the memory card directly.
To remove the memory card, it is suggested that you turn off the device rst, in order to
prevent damage of the le recorded in the memory card.
․ Our company's product does not guarantee the compatibility with all types of Micro SD
memory cards.
․In case of any failure of memory card, please contact the memory card manufacturer.
․Please do not place the memory card at humid or moist area, such as contact with high
moisture object or corrosive object.
Please prevent placement at high temperature area, such as area with direct sunlight
exposure or area adjacent to device with heating function.
․Please check the memory card periodically to determine if there is a need to perform
formatting or replacement with a new card.
Attention: Before inserting a new memory card into the device
for the first time, it is necessary to complete the formatting first,
in order to ensure the normal function use.