manual

C50.A6010.00E-1

Hardware list

Fan(1)

Loosing four thumb screws to release the M/B tray.

Thumb screw(4)

for HDD extra fixing

5.25"

mounting bracket

3.5"

mounting bracket

Secure the stand-off bolts on the M/B

tray which match with the M/B fix points,

place the M/B on the copper bolt, fasten

the screws to secure.

Screw(31)

to fix drive & motherboard

Copper bolt(12)

for motherboard

Thumb screw(18)

& rubber ring(18)

for fix HDD

REAR

Caution:Both side panels

need to remove first in

order to remove the top

panel

Loosing four screws to remove the

tep panel

14cm fan

with filter

HDD module

Screw(6)

to fix power supply

Case components

3-speed fan

controller

PAGE 1
Case components 5.25" mounting bracket 3.5" mounting bracket 3-speed fan controller 14cm fan with filter HDD module REAR Loosing four screws to remove the tep panel Caution:Both side panels need to remove first in order to remove the top panel 1 2 Loosing four thumb screws to release the M/B tray. Secure the stand-off bolts on the M/B tray which match with the M/B fix points, place the M/B on the copper bolt, fasten the screws to secure.
PAGE 2
Hard disk installation for modularized HDD cage 1. Fasten the HDD screws with anti-vibration rubber rings to the HDD. 2. Slide the HDD into the HDD cage with the anti-vibration kit. Press down the HDD into the slots to secure. Removable PSU tray 3-speed fan adjustable device Note: Adding extra screw to the HDD cage for extra security. 12cm fan installation Optional kit Thermometer TR-3A TR-3B USB 2.0 flash card reader / writer Su pport mu ltiple types of me mo ry card CR-36A CR-36B C50.A6010.