Product Manual

Baby crying warning light
The number (maximum 5) of warning lights above screen of host to be turned on is determined according to the volume of
baby crying.
Monitoring image enlargement
Zoom in camera monitoring image to see clearly.
Infrared night vision
Eight night vision lamps help parents to see baby clearly in the night .
Air thermometer
Measure air temperature around baby at any time
2.4G Wireless digital encryption transmission
Do not need wire to transmit data over maximum 300M (984ft), easy to deploy.
Easy to operate with large buttons
Large buttons is convenient for person to operate the product with simple settings.
Beautiful and lovely appearance
Product appearance looks beautiful and lovely.
Multi-screen monitoring
Multi-screen monitoring with two cameras.
Nursing reminder
Set regular feeding time to remind mother.
5. Startup:
Host start up
During shutdown state, when the host with a screen connects to the 5V DC power or power of the built-in
battery is enough, long press “ ” key, the host will start up and the screen will light. When the host
connects to the 5V DC power, the built-in battery charges automatically until full.
Camera start up
When the camera is connected to 5V DC power，it starts up automatically.
After both the host and the camera are powered on and start up, if the host screen can not display the
monitoring image taken by the camera correctly, the pairing settings are needed to be modified. See
section below
6. Pairing settings.
pairing settings
I. Initial pairing settings: Press menu key ( ) to enter the menu when the host is on, then press Select key ( ) or
( ) select camera setting bar ( ), press menu key ( ) to enter setting, then press Select key ( ) to enter