User's Guide

ManualsBrandsLibelium Comunicaciones Distribuidas ManualsElectronicsWireless sensor node for the Internet of Things

1

2

3

4

5

6

7

8

9

Table Of Contents

-10-

3.5. Antenna

By default Waspmote Plug & Sense! has one external antenna with a standard reverse polarized SMA connector. This connector

allows to connect the RF antenna.

Figure : Antenna connector of the enclosure

To ensure good RF coverage, be sure antenna points to the sky and also be sure antenna is screwed completely to the connector.

To connect the antenna, just align it with the connector and screw it carefully. Antenna must be connected in order to ensure

RF communication.

Figure : Connecting antenna to the enclosure

Note: Once Waspmote Plug & Sense! is installed, it is recommended to x it using a tape like the one shown in the picture below.