User's Guide

ManualsBrandsLibelium Comunicaciones Distribuidas ManualsElectronicsWireless sensor node for the Internet of Things

Table Of Contents

-17-

Step 3: Connect the USB cable to the PC

Connect the other side of the USB cable to your PC.

Figure : Connecting the node to a PC

Step 4: Turn On Waspmote Plug & Sense!

Be sure you have turned ON the node by pressing ON/OFF button.

Figure : Turning ON Waspmote

Step 5: Open Waspmote IDE

Now open Waspmote IDE. If you do not have Waspmote IDE already installed in your PC, then go to the Development section

of Libelium website to download it.