User's Guide

ManualsBrandsLibelium Comunicaciones Distribuidas ManualsElectronicsWireless sensor node for the Internet of Things

1

2

3

4

5

6

7

8

9

Table Of Contents

-7-

3.4. USB

This connector is used to upload code into Waspmote with a male to male USB cable provided by Libelium. Just connect one

side of the cable to this connector, removing protection cap and connect the other side to a PC to upload a code. Next picture

shows an example.

Figure : USB connector and protective cap

Figure : Connecting the USB cable to Waspmote

When uploading processes are nished, do not forget to screw rmly the protection cap to avoid connector damage.