Installation Guide

5
ASSEMBLY
4
FIGURE 7
Align the holes in the crank handle (A) with the
crank handle shaft on the hose reel (E). Insert the
short Allen screw (DD) into the crank handle and
tighten with supplied Allen wrench (AA)
6
5
Attach leader hose (B) to swivel connector on
the hose reel (D). Attach end of leader hose
to water source.
7
Attach the basket (D) to the swing arm
(C) by fastening the keyhole opening
to the resting pins then dropping the
basket into the set position.
Attach your garden hose to the hose connector on
the hose reel (E). The hose is now ready to wind
around the spool. The Single Arm Navigator holds
up to 125 ft. of 5/8” garden hose.
FIGURE 5 FIGURE 6
B
E
E
FIGURE 4
A
DD
E
AA
A
D