Instructions / Assembly

ManualsBrandsLiberty Garden ManualsKitchen4-in-1 Multi Purpose Hose Cart

Model 698/694 200’ and Model 706 100’

“4 in 1” Hose Reel Owner’s Manual

VISIT OUR WEBSITE: WWW.LIBERTYGARDENPRODUCTS.COM OR

CALL US TOLL FREE AT 1-866-820-5805

LIBERTY GARDEN PRODUCTS, INC.

500 INDENEER DRIVE, SUITE 9, KERNERSVILLE NC 27284

IMPORTANT: READ THE OWNER’S MANUAL BEFORE ASSEMBLING

698/694

706

Summary of content (8 pages)

PAGE 1
Model 698/694 200’ and Model 706 100’ “4 in 1” Hose Reel Owner’s Manual 706 698/694 VISIT OUR WEBSITE: WWW.LIBERTYGARDENPRODUCTS.COM OR CALL US TOLL FREE AT 1-866-820-5805 LIBERTY GARDEN PRODUCTS, INC.
PAGE 2
TOOLS REQUIRED: TWO ADJUSTABLE WRENCHES; HAMMER The 698/694 200’ and the 706 100’ Multi Purpose “4 in 1” hose reel cart easily changes from a maneuverable two wheel cart, to a solid wall mounted reel. It also can be anchored to lawn/turf or add the rubber boots for a non-skid floor mount. This in one unit that will fit all your hose reel needs. Estimated assembly time: 30 minutes. PARTS LIST B A. LEADER HOSE (1) B. SPOOL (1) E C. TIRES (2) G D. LEGS (2) A E. U-HANDLE (1) C F. AXLE (1) F D G.
PAGE 3
CART ASSEMBLY: THIS UNIT MAY BE ASSEMBLED AS A TWO WHEEL HOSE CART AS FOLLOWS: 1. Assemble the legs (D) to the bottom of the spool base (B) using Carriage Bolts and nuts (K). Insert bolts thru the 4 outside holes on the bottom of the spool base and thru legs. Attach nuts and tighten securely. See Figure 1. FIGURE 1 2. Insert the axle (F) thru the holes in the legs (a hammer maybe needed to insert axle). Place one spacer (N) onto axle, then slide the tire on the axle. See Figure 2. N F FIGURE 2 3.
PAGE 4
FIGURE 4 5. Turn the cart upright. Place the U-handle (E) over the ends of the legs and use two hex bolts (L) and wing nuts to secure the U-handle. Attach the basket using two Hex Bolts and fasten with the wing nuts (L). See Figure 4 6. Attach the handle (H) to the steel crank. Secure one nut to the bolt in the handle, insert thru steel crank and secure the second nut to the end of the bolt. If desired, the two nuts may be adjusted to allow the handle to rotate freely. See Figure 5. FIGURE 5 7.
PAGE 5
Permanent Wall Mounting: No mounting hardware is provided with the unit. There are too many different surfaces that the unit could be mounted on. When mounting, remember that a unit with a water filled hose could weigh as much as 35 pounds. Mount the unit securely to a solid surface, ensure that large, long steel hardware is used. Ground Mounting: Use the four stakes (J) provided to secure the unit to the ground. Place the stakes through the holes in the base of the spool (B).
PAGE 6
Curing a Leaking Swivel Problem: Your new Liberty® hose reel or hose reel cart is leaking at the swivel. Solution: It is normal for the swivel to leak slightly until the O-rings are wet and have seated. If the leaking continues, you don’t need to take the cart back to the store. This is a simple problem and is easily fixed by a simple procedure. 1. If the leader hose is attached to the swivel, unscrew the hose and look inside the swivel. 2.
PAGE 7
Care Instructions Rust Your Liberty™ hose reel will give you many seasons of reliable and functional hose storage. As with any steel product, there is always the chance of rust developing over time. Your Liberty™ hose reel finish is designed for industrial applications, but even the toughest of coatings can be compromised by scratches. Such minor surface damage can occur in shipping despite our best efforts.
PAGE 8
Warranty & Care Our guarantee is as functional and straight-forward as our products. Since we design and build our products to provide you with many years of satisfaction, all Liberty™ products are guaranteed against defects in materials and workmanship. In the unlikely event that a problem arises as a result of a defect in our materials or workmanship, we will promptly repair or replace the item at our expense. All we require is that you contact us first and we'll take it from there.