Use and Care Manual

Safety Information

SET UP YOUR FURNITURE PROPERLY

Ensure that all parts are assembled properly and fully tightened as per the instructions. When

placing in the desired location, ensure that all legs are resting on the same surface. You may

adjust the legs levelers as required to ensure that the item stands in a rigid position.

EXAMINE YOUR FURNITURE

Examine occasionally to ensure that there are no loose parts. If loose parts are found, they must

be retightened fully before additional use.

Warranty

WARRANTY

We warrant our products to be free of manufacturing defects to the original purchaser for the

period listed below. We reserve the right to make substitutions with similar merchandise, if the

model in question is no longer in production.

EXCLUSIONS

This warranty does not cover: Furniture used for commercial or non-residential purposes;

failures caused by improper care; unreasonable or abusive use; freeze damage; acts of nature.

Steel products are not covered against rust. Tempered glass table tops are not covered against

breakage.

FINISH

Frame finish is warranted to be free of manufacturing defects for a period of one (1) year.

Discoloration or fading of the finish as a result of exposure to the elements, chemicals, or spills

is not covered.

FABRIC

Fabric is warranted to be free of manufacturing defects for a period of one (1) year.

Discoloration or fading of the finish as a result of exposure to the elements, chemicals, or spills

is not covered.

FRAMES

Frame is warranted to be free from defects in material or workmanship for a period of two (2)

years for steel frame. This product is made with a steel frame.

FREIGHT & PACKAGING

Freight and packaging are the responsibility of the original purchaser.

CUSTOMER SERVICE

In case of a problem, call 1-800-457-4652 between 9:00 am to 4:00 pm Eastern standard time

Monday through Friday or contact us at www.numarkcustomerservice.com for any question or

problems you may have.

PAGE 1
Safety Information SET UP YOUR FURNITURE PROPERLY Ensure that all parts are assembled properly and fully tightened as per the instructions. When placing in the desired location, ensure that all legs are resting on the same surface. You may adjust the legs levelers as required to ensure that the item stands in a rigid position. EXAMINE YOUR FURNITURE Examine occasionally to ensure that there are no loose parts. If loose parts are found, they must be retightened fully before additional use.
PAGE 2
Care and Maintenance Though its powder-coated finish is rust-resistant, steel is prone to rust over time with exposure to the elements. In case of rust or scratches, lightly sand the affected area and apply touch-up paint. To maintain the finish periodically apply wax with a soft cloth.