Specification Sheet

230-Series

Submersible

Sump Pumps

1/3 hp

1-1/2" Discharge

3/8" Solids Handling

Features:

• Vortex style impeller permits

passage of solids without

clogging

• Polypropylene and powder coated

aluminum construction

• Stainless steel rotor shaft

• All fasteners – non-corrosive

stainless steel

• Oil-filled, hermetically sealed motors

with thermal overload protection

• Permanently lubricated upper

and lower bearings

• Quick-disconnect 10' standard power

cord allows replacement of cord in

seconds without breaking seals

to motor. (25' length optional)

Models:

230 Manual

231 Mercury-free float, integrally wired,

with quick disconnect feature

233 Mercury-free float, with series plug

237 VMF, Vertical Magnetic Float

MODEL

237 VMF

Deep Finned

Powder Coated

Aluminum

Motor Housing.

Provides 225%

more cooling

capacity than

cast iron

housings!

230 v6:230 v5 11/21/11 10:03 AM Page 1

PAGE 1
230 v6:230 v5 11/21/11 10:03 AM Page 1 230-Series Submersible Sump Pumps 1/3 hp 1-1/2" Discharge 3/8" Solids Handling Features: Deep Finned Powder Coated Aluminum Motor Housing.
PAGE 2
30 v6:230 v5 11/21/11 10:03 AM Page 2 230-SERIES SUBMERSIBLE SUMP PUMPS ALL MODELS FEATURE MOTOR SPECIFICATIONS • Vortex style impeller permits passage of solids without clogging. Made of high temp engineered thermoplastic. 1/3 hp. 60Hz 115V 3450 RPM 5.2a Oil Filled; Thermally Protected • Polypropylene and powder coated aluminum construction. • Stainless steel rotor shaft. TDH 5' 10' 15' 21' • All fasteners – non-corrosive stainless steel.