Submittal Sheet

11.01 SUPPORT

The pump shall have cast iron support legs, enabling it to be a free standing unit. The legs will be high enough to allow 3/4” solids to

enter the volute.

12.01 SERVICEABILTY

Components required for the repair of the pump shall be shipped within a period of 24 hours.

13.01 FACTORY ASSEMBLED TANK SYSTEMS WITH GUIDE RAIL AND QUICK DISCONNECT DISCHARGE

______ Guide factory mounted rail system with pump suspended by means of bolt on quick disconnect which is sealed by means of

nitrile grommets or o-rings. The Discharge piping shall be schedule 80 PVC and furnished with a PVC check valve and shut-off ball

valve. The Tank shall be wound fiberglass or roto-molded plastic. A cast iron inlet hub shall be provided with the fiberglass systems.

______ Stainless steel Guide Rail

______ Zinc plated steel Guide Rail

______ "diameter of basin size

______ "height of basin size

______ "distance from top of tank to discharge pipe outlet

______ Fiberglass cover

______ Structural foam polymer cover

______ Steel cover

______ Simplex System with Outdoor panel and alarm

______ Duplex System with Outdoor panel and alarm

______ Separate Outdoor Alarm

______ Remote Outdoor Alarm

14.01 TESTING

The pump shall have a ground continuity check and the motor chamber shall be Hi-potted to test for electrical integrity, moisture content

and insulation defects. The motor and volute housing shall be pressurized, and an air leak decay test is performed to ensure integrity of

the motor housing. The pump shall be run, voltage current monitored, and the tester checks for noise or other malfunction.

15.01 QUALITY CONTROL

The pump shall be manufactured in an ISO 9001 certified Facility.

16.01 WARRANTY

Standard limited warranty shall be 3 years.