Install Instructions

©Copyright 2016 Liberty Pumps Inc. All rights reserved. 9
5. StormCell™ Interface Functionality
Power Indication - indicates
user interface has power
(Illuminated by charger pow-
er through RJ45 communica-
tion cable)
Indicates a low 9V battery.
9V battery should be replaced at least
yearly, or as required if this LED is
illuminated.
Setup LEDs—only present
on NightEye™ models.
Pump run LED, illuminat-
ed when the 442 pump is
activated.
Fault LED—indicates a system
fault.
Navigation Buttons,
scroll through notifications
on UI LCD
Alarm Silence Button
Resets after 6 hours or if
‘Silence’ button is pressed again.
StormCell™ UI LCD
Displays system / fault info
POWER
LOW 9V
BATTERY
SETUP
PUMP
RUN
FAULT
CLEAR
PUMP
TEST
ALARM
TEST
SILENCE
Clear System Notifications
Pump Test—Pump will run for
3 seconds or until the test button
is released.
Alarm Test—Alarm will
sound for approximately 5
seconds. NightEye™ enabled
devices will send notifications
as appropriate.
If applicable, refer to
NightEye™ quick-
start guide for more
information.