Manual

ManualsBrandsLiberty Pumps ManualsHardwareARC18-Series

Installation Manual

7171000D

Access Riser – Fits PRO370 and PRO380 Series

Contents

1.) General Information

2.) Installation

3.) Optional 2” Installation Kits

4.) Typical Installation Diagram

5.) Junction Box Template

Part Numbers and Descriptions

AR18 Riser only

AC18 Cover only

ARC18 Riser and cover kit

IKIT2-115 2” installation accessories, 115 volt hook-up

IKIT2-230 2” installation accessories, 230 volt hook-up

ARCKIT115 Complete kit …riser, cover and installation

accessories, 115 volt

ARCKIT230 Complete kit …riser, cover and installation

accessories, 230 volt

7000 Apple Tree Avenue

Bergen, NY 14416

Phone: (800) 543-2550

Fax: (585) 494-1839

Website: www.libertypumps.com

Summary of content (5 pages)

PAGE 1
Installation Manual 7171000D Access Riser – Fits PRO370 and PRO380 Series Contents 1.) General Information Part Numbers and Descriptions 2.) Installation 3.) Optional 2” Installation Kits 4.) Typical Installation Diagram AR18 AC18 ARC18 IKIT2-115 IKIT2-230 ARCKIT115 5.
PAGE 2
1. General Information IMPORTANT: This unit is designed to allow a PRO370 or 380 simplex ejector system to be installed up to 18 inches below grade in an outdoor installation. It is not a gas or water tight tank extension that increases the capacity of the basin. The riser provides a convenient underground chamber for the electrical and pipe connections to exit underground and out-of-sight.
PAGE 3
6. 7. Backfilling. Use only fine, 1/8" to 3/4" pea gravel or 1/8" to 1/2" washed, crushed stone as backfill around the access riser. Do not use sand or native soil as backfill. Tamp backfill lightly. Avoid running heavy equipment next to the riser. A light layer of topsoil can be used at cover level. Installation of cover. The cover features a twist-lock design and 4 stainless steel screws to secure it.
PAGE 4
. Typical Installation Diagram (PRO380 shown) PP(ProInstalla&hgjhjhgj&TroubleshootingTroubleshooting&T roubleshooting&Troubleshooting&Troubleshooting&Troubles hooting&Troubleshooting Installation components from IKIT2-115 or IKIT2-230 shown. Liberty installation kits are available in 2” only. Due to size constraints, certain component of 3” discharge systems may need to be mounted outside of the riser. 5. 3 Year Limited Warranty Liberty Pumps, Inc.