Product Overview

Liberty Pumps • 7000 Apple Tree Avenue • Bergen, New York 14416 • Phone [phone] Fax [phone]
www.libertypumps.com
Technical Specifications
FL100, FL150 and FL200-Series
Specifications
subject to change
without notice.
®
Copyright © Liberty Pumps, Inc. 2015
All rights reserved. LLIT6604-R03/15
Model hp. Volts Phase Amps Discharge Automatic Cord Length Wgt. Lbs.
FL102M-2 1 208-230 1 12 1-1/2” & 2” No 25’ 71
FL102A-2 1 208-230 1 12 1-1/2” & 2” Yes 25’ 72
FL103M-2 1 208-230 3 9 1-1/2” & 2” No 25’ 71
FL104M-2 1 440-480 3 4.5 1-1/2” & 2” No 25’ 71
FL105M-2 1 575 3 3.3 1-1/2” & 2” No 25’ 71
FL152M-2 1-1/2 208-230 1 15 1-1/2” & 2” No 25’ 81
FL152A-2 1-1/2 208-230 1 15 1-1/2” & 2” Yes 25’ 82
FL153M-2 1-1/2 208-230 3 10.6 1-1/2” & 2” No 25’ 81
FL154M-2 1-1/2 440-480 3 5.3 1-1/2” & 2” No 25’ 81
FL155M-2 1-1/2 575 3 4.9 1-1/2” & 2” No 25’ 81
FL202M-2 2 208-230 1 15 1-1/2” & 2” No 25’ 82
FL202A-2 2 208-230 1 15 1-1/2” & 2” Yes 25’ 83
FL203M-2 2 208-230 3 10.6 1-1/2” & 2” No 25’ 82
FL204M-2 2 440-480 3 5.3 1-1/2” & 2” No 25’ 82
FL205M-2 2 575 3 4.9 1-1/2” & 2” No 25’ 82
External Construction:
Pump Volute – Gray iron casting class 25
Pump Legs – Gray iron casting class 25
Motor Cover – Gray iron casting class 25
All casting shall be powder coated for corrosion
resistance prior to assembly.
Motor:
Submersible 3450 RPM, oil filled and hermetically sealed.
Class B insulation rating. FL100 only 17-4 PH Stainless steel.
(FL150 and FL200, 416 Stainless steel rotor shaft.) Thermally
protected – single phase models. Three phase models shall
have overloads incorporated into the
control panel, properly sized for the horsepower and
amperage of the pump.
Impeller:
Semi-open design. Cast iron construction.
Dual Shaft Seals:
FL100-Series feature upper unitized carbon ceramic and
lower Viton double lip.
FL150 and FL200-Series feature upper unitized silicon
carbide, lower Viton double lip.
Fasteners:
All fasteners shall be 300-series stainless steel.
Power Cord:
25’ length standard. Quick-disconnect design allows
easy field replacement.
Level Control:
The pump shall be controlled by a wide angle mechanical
float sealed in a PVC housing. The float shall have a series
plug for manual by-pass operation.
A water-stop seal shall be incorporated into the cord
entry to eliminate potential water wicking into the switch.
An adjustable clamp is provided for optional pipe
mounting of the float.
Discharge:
2” FNPT with 1-1/2” FNPT cast iron flange provided.
60 hz Performance Curve FL100, FL150 and FL200-Series - Maximum Fluid Temperature 140˚ F
NOTE: 3-phase models require a control panel for automatic operation. See simplex and duplex panel literature for complete information.
35’ cord option available on some models. Consult factory.
0 151
76
0
10
20
30
40
0102030405060
10
20
30
40
50
60
70
80
90
100
110
120
0
130
140
70 80 90 100110 120 130
FL100
FL150
FL200
FL200
FL150
FL100
Flow (GPM)
Head (Feet)
Head (Meters)
Liters Per Minute
303
227
379 454
®