Spec Sheet

FL50-Series

Submersible

Effluent

Pumps

3/4" Solids Handling

1-1/2" or 2"

Discharge

1/2 hp

Features:

• Semi-open impeller permits

passage of solids without clogging

• Heavy cast iron construction

• Stainless steel fasteners

• 416 stainless steel rotor shaft

• Permanently lubricated upper and

lower ball bearings

• Oil-filled hermetically sealed motor

with thermal overload protection

• Unitized carbon and ceramic shaft seal

• Dual-sized discharge flange:

1-1/2" or 2"

• Quick-disconnect power cord in

10' standard length (25', 35' and 50'

optional lengths available on

some models)

PAGE 1
FL50-Series 1/2 hp Submersible Effluent Pumps 3/4" Solids Handling 1-1/2" or 2" Discharge Features: • Semi-open impeller permits passage of solids without clogging • Heavy cast iron construction • Stainless steel fasteners • 416 stainless steel rotor shaft • Permanently lubricated upper and lower ball bearings • Oil-filled hermetically sealed motor with thermal overload protection • Unitized carbon and ceramic shaft seal • Dual-sized discharge flange: 1-1/2" or 2" • Quick-disconnect power cord in 10' stand
PAGE 2
FL50-SERIES TECHNICAL SPECIFICATIONS FL50-Series PERFORMANCE CURVE 60 Hz. EXTERNAL CONSTRUCTION: Pump Volute and legs – Gray iron casting class 25 Motor Cover – Gray iron casting class 25. All castings shall be powder coated for corrosion resistance prior to assembly. Liters Per Minute 70 Fasteners – all fasteners shall be 300-series stainless steel. Cast iron – class 25, semi-open design capable of passing a minimum 3/4" solids.