Install Manual

7
Outlet Connection
3. Install Outlet Tube Connection
Attach plastic tubing to check valve and secure with hose clamp (sold
separately). Route tubing up and away from condensate pump (avoid
compressing or kinking tubing).
1
2
3/8" Clear Vinyl
Plastic Tubing
5/8" Hose Clamp
Check Valve
3
Support pump and piping when assembling and when installed. Failure to do so
may cause piping to break, pump to fail, motor bearing failures, etc.
2. Level Unit
Ensure that condensate pump is level. If unit is out of level by more than 15º
from horizontal surface, it will not function properly and warranty and property
protection will not be valid.
Installation
2