Installation Guide

Hook Mounting Instructions
Liberty Hardware Manufacturing Corporation
140 business Park Drive
Winston-Salem, NC 27107
If you have any trouble, visit: www.libertyhardware.com.
Or call 1-800-542-3789
Wear safety goggles
When drilling into the wall, exercise care to avoid any electrical wiring
or plumbing that may be located behind the wall. Damaged electrical
wiring can cause electrical shock and/or fire.
Instructions for Solid Wood or Wood Stud Mount Installation
1. Place hook in desired location.
2. Mark mounting hole locations.
3. Drill 3/32" pilot holes.
4. Fasten hook using screws provided.
Note: Anchors not included. The maximum capacity for this hook is 35 lbs.
when mounted into solid wood or wood studs.
Instructions for Drywall, Green Board, Metal Stud, or
Concrete.
For applications other than solid wood or wood studs, use anchors designed for
your specific application and follow manufacturer's installation instructions. The
maximum capacity of hook rail will vary depending on the thickness of the wall
material and type of attachment hardware used, but will never exceed 35 lbs.

Summary of content (3 pages)