Installation Guide

9-13 lbs
Hinges Hinges Hinges Hinges
36" tall
14-26 lbs
56" tall
32
27-37 lbs
80" tall
4 5
38-50 lbs
92" tall
20" Wide
Parts List
• Two Euro Face Frame 6-way Adjustable Hinge
• 2 #8x1" Pan Head Wood Screws
Recommended Tools
• #2 Phillips Screwdriver
• Pencil or Scribe
• Metric Ruler
• Drill, 1/8" or 3/32" Drill Bit and 8mm Drill Bit
• Boring Bit 35mm (Forstner Bit) for hinge cup
Data
• See chart below for recommended number of
hinges per door size
• If hanging a door with a mirror or very wide
door you will need additional hinges
Specifications
• Door thickness should be 5/8" (16mm) or
3/4" (19mm)
3. Installing Door to Cabinet
a. Open hinge to full extension
b. Connect door to cabinet as shown, B
4. Door Adjustment
Align door using following adjustment feature.
a. Lateral Adjustment allows for adjusting
door plus or minus 1.5mm side to side.
b. Horizontal Adjustment allows for adjusting
door plus or minus 1.5mm in and out.
c. Vertical Adjustment allows for adjusting
door plus or minus 2.5mm up and down.
1/2" Overlay Face Frame Concealed Hinge
Opening 105°
Hinge H70223
1/2 in
1/2 in Overlay
Chevauchement
sur 12,7 mm (½ po)
Superposición
de 1/2"
Top View
Vue du dessus
Vista de arriba
105°
a
b
c
140 Business Park Drive • Winston-Salem, NC 27107
www.libertyhardware.com
1-800-542-3789
CP3503-XXX Rev 03/24/11©2011 Liberty Hardware Manufacturing Corporation, A MASCO COMPANY
Wear Safety Goggles
Portez des lunettes de sécurité
Utilice gafas protectoras
Mounting Instructions
45
mm
35
mm
3
mm
9.5
mm
2. Installing Hinge to Door
a. Drill hole 12mm (15/32") deep for hinge cup
using 35mm boring bit. Do not drill through
door face.
b. Drill pilot holes for screws. Do not drill through
door face: Drill 8mm x 12mm deep hole for
dowels.
c. Insert hinge into door, A
8mm dowel hole
1. Marking Drill Holes for Hinge
a. Mark location of holes on cabinet door and
frame.
AB