Safety Data Sheets (SDS)

SAFETY DATA SHEET
The Libman Company LIBMAN READY TO USE GLASS CLEANER (1 GALLON #1064 / 32OZ BOTTLE #2068)
The Libman Company Page 3 of 7
SECTION 5. FIRE-FIGHTING MEASURES
5.1 FIRE EXTINGUISHING MATERIALS:
Use fire extinguishing methods below:
Water Spray: Yes Carbon Dioxide: Yes
Foam: Yes Dry Chemical: Yes
Halon: Yes Other: Any ā€œCā€ Class
5.2 UNUSUAL FIRE AND EXPLOSION HAZARDS:
Irritating and toxic fumes may be produced at high temperature. Use of water may result in the formation of a toxic
aqueous solution. Do not allow run-off from fire fighting to enter drains or water courses.
Explosion Sensitivity to Mechanical Impact: No
Explosion Sensitivity to Static Discharge: No
5.3 SPECIAL FIRE-FIGHTING PROCEDURES:
Incipient fire responders should wear eye protection. Structural firefighters must wear Self-Contained Breathing
Apparatus and full protective equipment. Isolate materials not yet involved in the fire and protect personnel. Move
containers from fire area if this can be done without risk; otherwise, cool with carefully applied water spray. If possible,
prevent runoff water from entering storm drains, bodies of water, or other environmentally sensitive areas.
NFPA RATING SYSTEM HMIS RATING SYSTEM
HAZARDOUS MATERIAL IDENTIFICATION SYSTEM
Flammability
HEALTH HAZARD (BLUE)
1
FLAMMABILITY HAZARD (RED)
0
Health
Reactivity
PHYSICAL HAZARD (YELLOW) 0
PROTECTIVE EQUIPMENT
EYES RESPIRATORY HANDS BODY
See Sect 8
See Sect
8
Other
For Routine Industrial Use and Handling Applications
Hazard Scale: 0 = Minimal 1 = Slight 2 = Moderate 3 = Serious 4 = Severe * = Chronic hazard
SECTION 6. ACCIDENTAL RELEASE MEASURES
6.1 PERSONAL PRECAUTIONS, PROTECTIVE EQUIPMENT AND EMERGENCY PROCEDURES:
Use cautious judgment when cleaning up spill. Wear suitable protective clothing, gloves and eye/face protection.
Evacuate personnel to safe areas
6.2 ENVIRONMENTAL PRECAUTIONS:
Construct a dike to prevent spreading. Keep out of sewers, storm drains, surface waters, and soils.
6.3 SPILL AND LEAK RESPONSE:
Small spills: Soak up with absorbent material such as clay, sand or other suitable non- reactive material. Place in
leak-proof containers. Seal tightly for proper disposal.
Large spills: Approach suspected leak areas with caution. Create a dike or trench to contain material. Soak up with
absorbent material such as clay, sand or other suitable non-reactive material. Place in leak-proof containers. Seal
tightly for proper disposal. Dispose of in accordance with U.S. Federal, State, and local hazardous waste disposal
regulations and those of Canada and its Provinces, those of Australia, Japan and EU Member States (see Section 13,
Disposal Considerations).
0
-
0
1