Operation Manual

FACTORY RESET
Logo Button
To clear all speaker settings on your Libratone speaker you need to perform a factory reset.
• Hold “Logo Button” while powering up the speaker.
• Release the “Logo Button” when it turns solid YELLOW.
• After 45 sec. of pulsing YELLOW the speaker will emit the WHITE setup sequence and enter
Setup Mode.
CONNECT AUX
You can connect the old fashioned way as well, by
using the 3,5 mini jack/digital mini plug. This is a
great way of upgrading the mediocre sound of your
TV. You can use both the analog and the digital
ports of your TV. We recommend you use the
analog connection (‘headphone out’), since this
enables you to use your TV remote control to adjust
the volume.
If you choose the digital connection, you need to
download our app to control the volume. On most
Apple products you can adjust the volume directly
on the product - also when you use the digital
connection.
Oh, by the way - in our world wireless always
trumps wires. This means that your wireless
streaming overrules the AUX connection.
So make sure nothing is streaming, when
you want to use AUX.
30 31