User's Manual

LS5B User Manual
Libre Wireless Technologies User Manual: LS5B, Ver. 1.0 Page 14 of 89
Libre Confidential
2. Libre Wireless Technologies’ EVK
Figure 2-1 Marks different components of the LS5B Module
Figure 2-1: LS5B Module Peripherals
2.1. LS5B EVK Setup
To setup the LS5B EVK and get started proceed as below
Step 1. Ensure the LS5B module is inserted in the EVK
Step 2. Connect the USB-to-Serial Cable from Serial port of EVK to USB port of
Laptop
Step 3. Connect the Power adaptor to DC Jack on EVK
Step 4. Power On the EVK, using ON/ OFF Switch
Step 5. Open the terminal tool (Hyper Terminal / Teraterm) on your laptop
Step 6. Configure the Serial settings, as below
- Baud Rate at 57600
- Data Bits at 8
- Parity at None
- Stop Bits at 1