User's Manual

LS5B User Manual
Libre Wireless Technologies User Manual: LS5B, Ver. 1.0 Page 31 of 89
Libre Confidential
To set the MCLK at 12MHz
#setenv MCLK <<12000000>>
To set the MCLK at 12.288MHz
# setenv MCLK <<12288000>>
4.7. ACP
NV-Item ACPpresent enables detection of the Apple Co-processor for ACP certificate
validation. By default the NV-Item ACPpresent is set as 1.
The syntax below provides command to enable or disable ACP presence detection.
Enable
#setenv ACPpresent <<1>>
Disable
# setenv ACPpresent <<0>>
4.8. Model Name
The NV-Item Model is used to set the model name for the Speaker or the device. The model
name can be any name of the user choice. The Maximum length of the model name is 63
characters.
The default Model Name for LS-Enabled speakers is LibreSync. You can change the model
name by editing the NV-Item Model.
#setenv Model <<ModelNewName>>
Editing the NV-item changes the Model Name as “ModelNewName”.
4.9. Manufacturer Name