User's Manual

LS5B User Manual
Libre Wireless Technologies User Manual: LS5B, Ver. 1.0 Page 40 of 89
Libre Confidential
6. Network Configuration
The network configuration method supported in LS-Module is
Wireless Network Setup Using WAC Method
Wireless Network Setup Using SAC Method
Wireless Network Setup Using Webserver Method
Wireless Network Setup Using WPS Push Button Method
6.1. Wireless Network Setup Using WAC and SAC
6.1.1. Wireless Network Setup Using WAC
To setup a wireless network using Wireless Area Controller (WAC) proceed as below
Step 1. Press and hold the Setup button for 3 seconds on the EVK
Step 2. On an iOS device running iOS7, go to Settings > Wi-Fi > SET UP NEW DEVICE
The WAC speaker is listed. For example, LibreSync <MacID>
Figure 6-1: WAC Speaker Listed
Step 3. Select the speaker / EVK and tap NEXT