User's Manual

LS5B User Manual
Libre Wireless Technologies User Manual: LS5B, Ver. 1.0 Page 46 of 89
Libre Confidential
3. Trigger WAC / SAC using the Setup Button (Press and Hold
for three seconds) in LS EVK or through Message-Box 142.
Result
LS-Enabled Speaker switches from DDMS Mode to Non-DDMS
Mode and enters WAC / SAC mode for Network Configuration.
Scenario 4
Precondition
LS-Enabled speaker is in Non-DDMS Mode and is connected to
AP.
Action
1. Reboot the Speaker. Currently the speaker is in Non-DDMS
Mode.
2. Configure the speakers to DDMS-Mode i.e. either in SA
Mode/HN Mode (refer to DDMS usability guide).
3. Trigger WAC / SAC using the Setup Button (Press and Hold
for three seconds) in LS EVK or through Message-Box 142.
Result
LS-Enabled Speaker switches from DDMS Mode to Non-DDMS
Mode and connects to the AP configured earlier.
Scenario 5
Precondition
LS-Enabled speaker is in DDMS Mode and was not connected to
AP earlier.
Action
1. Reboot the Speaker and
2. Trigger WAC / SAC using the Setup Button (Press and Hold
for three seconds) in LS EVK or through Message-Box 142.
Result
LS-Enabled Speaker switches from DDMS Mode to Non-DDMS
Mode and enters WAC / SAC mode for Network Configuration.
Scenario 6
Precondition
LS-Enabled speaker is in DDMS Mode and was connected to AP
earlier.