User's Manual
Table Of Contents
- 1. Introduction
- 2. Libre Wireless Technologies’ EVK
- 3. Firmware Update
- 4. Configuring Non-Volatile-Item
- 5. Key Button Functionality
- 6. Network Configuration
- 7. Features
- 7.1. Libre APP for Android
- 7.2. DDMS
- 7.3. Software Security
- 7.4. Source Switching
- 7.5. Failsafe Mechanism
- 7.6. Autosense of Audio CODEC
- 7.7. AUX-In Support
- 7.8. Airplay®
- 7.9. DLNA ® / DMR
- 7.10. Miracast
- 7.11. SD-Card Playback
- 7.12. i-Device playback over USB
- 7.13. Favourites
- 7.14. USB Playback
- 7.15. TCP / IP Tunneling
- 7.16. Wi-Fi Scan Result
- 7.17. Device Name Configuration
- 7.18. Switch between Wired and wireless modes
- 7.19. Pair / Share credentials
- 7.20. Multiple SSID
- 7.21. Zone Volume.
- 7.22. Music Services
- 7.23. Telnet
- 8. Appendix
LS6 User Guide
Libre Wireless Technologies User Guide: LS6, Ver. 6.0 Page 12 of 81
Libre Confidential
3. Firmware Update
The Firmware Update process, facilitates update of U-Boot, BSL, and Application images
individually, or all of them together (Single-Image) to the LS-Module.
LSx Platform supports following Sources of Firmware-Image and Interfaces to trigger the
upgrade activity:
Image Source: USB, SD-Card, Network or Internet
Trigger Interfaces: Shell-Command/Host MCU(via LUCI), Libre App, or
Webpage
For more details on How to trigger Firmware Upgrade via LUCI, refer to
“Light Weight Universal Control Interface Technical Note”
The support for Shell-Command interface to initiate Firmware Upgrade is supported only
from LS6 version v6041 and onwards.
For Customers using firmware version 6076 or before, it is
mandatory to do factory reset by issuing command #SetFacDefault in
the terminal, after upgrading the firmware v6077 and later.
Make sure devices with firmware version 6076 and before is not present
in the same network as that of devices with Firmware version 6079 and
later.
While using the latest Libre APP (Android v1p25, iOS v1p3 or later),
released along with firmware version 6079, Do not use Libre APP that
supports firmware version 6077 or before.
To know the firmware version and Release date, execute the following command “#getprop”
in the shell: