User's Manual
Table Of Contents
- 1. Introduction
- 2. Libre Wireless Technologies’ EVK
- 3. Firmware Update
- 4. Configuring Non-Volatile-Item
- 5. Key Button Functionality
- 6. Network Configuration
- 7. Features
- 7.1. Libre APP for Android
- 7.2. DDMS
- 7.3. Software Security
- 7.4. Source Switching
- 7.5. Failsafe Mechanism
- 7.6. Autosense of Audio CODEC
- 7.7. AUX-In Support
- 7.8. Airplay®
- 7.9. DLNA ® / DMR
- 7.10. Miracast
- 7.11. SD-Card Playback
- 7.12. i-Device playback over USB
- 7.13. Favourites
- 7.14. USB Playback
- 7.15. TCP / IP Tunneling
- 7.16. Wi-Fi Scan Result
- 7.17. Device Name Configuration
- 7.18. Switch between Wired and wireless modes
- 7.19. Pair / Share credentials
- 7.20. Multiple SSID
- 7.21. Zone Volume.
- 7.22. Music Services
- 7.23. Telnet
- 8. Appendix
LS6 User Guide
Libre Wireless Technologies User Guide: LS6, Ver. 6.0 Page 16 of 81
Libre Confidential
On successful upload, web page displays the status of the update process
Figure 3.2.1-5: Firmware Update Status
End--
3.1.2. SD-Card / USB Method
To update the binary file (Application-Image or Single-Image) on the LS6 module from SD-
Card / USB using the web server proceed as below
Steps
Step 1. Ensure the binary filename as “lsimage” and place the firmware image in
root directory of SD-Card / USB.
The Firmware image should not contain any extension.
Step 2. Insert the SD-Card / USB in the LS6 EVK
Step 3. Execute command #netcfg in the device terminal to know the device IP
For Example, 10.0.1.13
Step 4. Enter the IP in the address bar of your browser
For Example, 10.0.1.13
Step 5. In the Firmware upgrade section, Select Method as SD-Card / USB and Click
Upgrade