User's Manual
Table Of Contents
- 1. Introduction
- 2. Libre Wireless Technologies’ EVK
- 3. Firmware Update
- 4. Configuring Non-Volatile-Item
- 5. Key Button Functionality
- 6. Network Configuration
- 7. Features
- 7.1. Libre APP for Android
- 7.2. DDMS
- 7.3. Software Security
- 7.4. Source Switching
- 7.5. Failsafe Mechanism
- 7.6. Autosense of Audio CODEC
- 7.7. AUX-In Support
- 7.8. Airplay®
- 7.9. DLNA ® / DMR
- 7.10. Miracast
- 7.11. SD-Card Playback
- 7.12. i-Device playback over USB
- 7.13. Favourites
- 7.14. USB Playback
- 7.15. TCP / IP Tunneling
- 7.16. Wi-Fi Scan Result
- 7.17. Device Name Configuration
- 7.18. Switch between Wired and wireless modes
- 7.19. Pair / Share credentials
- 7.20. Multiple SSID
- 7.21. Zone Volume.
- 7.22. Music Services
- 7.23. Telnet
- 8. Appendix
LS6 User Guide
Libre Wireless Technologies User Guide: LS6, Ver. 6.0 Page 17 of 81
Libre Confidential
Figure 3.2.2-1: Firmware Upgrade Method Selection
Step 6. LS6-Module reboots to BSL, and Firmware Upgrade from SD-Card / USB
starts automatically.
On successful upgrade, LS6-Module reboots, with the updated application.
End - -
3.1.3. Internet Method
To update the Application Image on to the LSx module proceed as below.
Make sure the LS6 module is in Home-Network mode, and is connected to the
Home-AP with internet access.
Also make sure your laptop / PC is connected to the same Home-AP.
Each customer has to maintain their own server; in which they will place their own
customized image. URL for the server location is customizable using the NV-Item
fwdownload_xml.