User's Manual
Table Of Contents
- 1. Introduction
- 2. Libre Wireless Technologies’ EVK
- 3. Firmware Update
- 4. Configuring Non-Volatile-Item
- 5. Key Button Functionality
- 6. Network Configuration
- 7. Features
- 7.1. Libre APP for Android
- 7.2. DDMS
- 7.3. Software Security
- 7.4. Source Switching
- 7.5. Failsafe Mechanism
- 7.6. Autosense of Audio CODEC
- 7.7. AUX-In Support
- 7.8. Airplay®
- 7.9. DLNA ® / DMR
- 7.10. Miracast
- 7.11. SD-Card Playback
- 7.12. i-Device playback over USB
- 7.13. Favourites
- 7.14. USB Playback
- 7.15. TCP / IP Tunneling
- 7.16. Wi-Fi Scan Result
- 7.17. Device Name Configuration
- 7.18. Switch between Wired and wireless modes
- 7.19. Pair / Share credentials
- 7.20. Multiple SSID
- 7.21. Zone Volume.
- 7.22. Music Services
- 7.23. Telnet
- 8. Appendix
LS6 User Guide
Libre Wireless Technologies User Guide: LS6, Ver. 6.0 Page 19 of 81
Libre Confidential
Step 1. Place the Firmware (Combined image with LS-Image, and HOST-MCU Image)
in the URL provided.
Step 2. Update the NV-Item fwdownload_xml with the URL of the XML file.
Step 3. Execute command #netcfg in the device terminal to know the device IP
Step 4. Enter the IP in the address bar of your browser
Step 5. In the Firmware upgrade section, Select Method as Internet and Click
Upgrade
Step 6. LS6-Module reboots to BSL. Once the DUT begins to download the
Application-Image from URL provided in the fwdownload_xml NV-Item. Firmware
Download progress is displayed.