User's Manual

LS6 User Guide
Libre Wireless Technologies User Guide: LS6, Ver. 6.0 Page 37 of 81
Libre Confidential
Scenario 4
Precondition
LS-Enabled speaker is connected to AP.
Action
1. Reboot the Speaker.
2. Configure the speakers to DDMS SA-Mode (refer to DDMS
usability guide).
3. Trigger WAC / SAC using the Setup Button (Press and Hold
for three seconds) in LS EVK or through Message-Box 142.
Result
LS-Enabled Speaker switches from DDMS Mode and connects to
the AP configured earlier.
Scenario 5
Precondition
LS-Enabled speaker is in DDMS SA-Mode and was not connected
to AP earlier.
Action
1. Reboot the Speaker and
2. Trigger WAC / SAC using the Setup Button (Press and Hold
for three seconds) in LS EVK or through Message-Box 142.
Result
LS-Enabled Speaker switches from DDMS Mode and enters WAC /
SAC mode for Network Configuration.
Scenario 6
Precondition
LS-Enabled speaker is in DDMS SA- Mode and was connected to
AP earlier.
Action
1. Reboot the Speaker and
2. Trigger WAC / SAC using the Setup Button (Press and Hold
for three seconds) in LS EVK or through Message-Box 142.
Result
LS-Enabled Speaker switches from DDMS Mode and connects to
the AP configured earlier.