User's Manual
Table Of Contents
- 1. Introduction
- 2. Libre Wireless Technologies’ EVK
- 3. Firmware Update
- 4. Configuring Non-Volatile-Item
- 5. Key Button Functionality
- 6. Network Configuration
- 7. Features
- 7.1. Libre APP for Android
- 7.2. DDMS
- 7.3. Software Security
- 7.4. Source Switching
- 7.5. Failsafe Mechanism
- 7.6. Autosense of Audio CODEC
- 7.7. AUX-In Support
- 7.8. Airplay®
- 7.9. DLNA ® / DMR
- 7.10. Miracast
- 7.11. SD-Card Playback
- 7.12. i-Device playback over USB
- 7.13. Favourites
- 7.14. USB Playback
- 7.15. TCP / IP Tunneling
- 7.16. Wi-Fi Scan Result
- 7.17. Device Name Configuration
- 7.18. Switch between Wired and wireless modes
- 7.19. Pair / Share credentials
- 7.20. Multiple SSID
- 7.21. Zone Volume.
- 7.22. Music Services
- 7.23. Telnet
- 8. Appendix
LS6 User Guide
Libre Wireless Technologies User Guide: LS6, Ver. 6.0 Page 41 of 81
Libre Confidential
Step 2. From the network list Select LSConfigure_xxxxxx and connect the laptop to
the network.
Step 3. Enter the following URL in the address bar of your browser 192.168.43.1
Figure 6.2.2-1: Network Status in Webpage
Step 4. Select the Access Point (AP) to be connected to from Select Your Network
drop-down list
Step 5. Select Security Type from Security drop-down list, Enter the valid login
credentials and Click OK
Device disconnects from laptop and connects to the network selected
Step 6. To know the newly acquired IP execute command #netcfg in the device
terminal
End--
6.2.3. Manual Configuration Method
To connect the device to the network manually proceed as below.
Optional: Device can be connected to the network using the hidden SSID.
Step 1. In Select Your Network section, enable Configure Manually
Step 2. Enter the Access Point SSID and Click Save.
Device reboots and connects to the network.