User's Manual
Table Of Contents
- 1. Introduction
- 2. Libre Wireless Technologies’ EVK
- 3. Firmware Update
- 4. Configuring Non-Volatile-Item
- 5. Key Button Functionality
- 6. Network Configuration
- 7. Features
- 7.1. Libre APP for Android
- 7.2. DDMS
- 7.3. Software Security
- 7.4. Source Switching
- 7.5. Failsafe Mechanism
- 7.6. Autosense of Audio CODEC
- 7.7. AUX-In Support
- 7.8. Airplay®
- 7.9. DLNA ® / DMR
- 7.10. Miracast
- 7.11. SD-Card Playback
- 7.12. i-Device playback over USB
- 7.13. Favourites
- 7.14. USB Playback
- 7.15. TCP / IP Tunneling
- 7.16. Wi-Fi Scan Result
- 7.17. Device Name Configuration
- 7.18. Switch between Wired and wireless modes
- 7.19. Pair / Share credentials
- 7.20. Multiple SSID
- 7.21. Zone Volume.
- 7.22. Music Services
- 7.23. Telnet
- 8. Appendix
LS6 User Guide
Libre Wireless Technologies User Guide: LS6, Ver. 6.0 Page 44 of 81
Libre Confidential
6.5. Know the IP of LS-Modules
You can know the IP address of the LS-Modules in one of the two ways.
Executing command #netcfg in the device terminal.
Or
Check the IP address from the webpage of the Home-AP
IP address from the Webpage of Home-AP
To know the IP address of the LS-Module from webpage of Home-AP do as below.
Step 4. Enter the default IP address of your Home-AP in the address bar of your
browser.
For example, if you use D-link router then the Default IP is 192.168.0.1
Step 5. Enter the Login Credentials and login to the webpage of Home-AP
Step 6. Go to Advanced Options and go to Wireless section
Step 7. In the connected device list select the MAC ID of the LS-Module.
Step 8. IP address of the module is known in the corresponding column.