User's Manual
Table Of Contents
- 1. Introduction
- 2. Libre Wireless Technologies’ EVK
- 3. Firmware Update
- 4. Configuring Non-Volatile-Item
- 5. Key Button Functionality
- 6. Network Configuration
- 7. Features
- 7.1. Libre APP for Android
- 7.2. DDMS
- 7.3. Software Security
- 7.4. Source Switching
- 7.5. Failsafe Mechanism
- 7.6. Autosense of Audio CODEC
- 7.7. AUX-In Support
- 7.8. Airplay®
- 7.9. DLNA ® / DMR
- 7.10. Miracast
- 7.11. SD-Card Playback
- 7.12. i-Device playback over USB
- 7.13. Favourites
- 7.14. USB Playback
- 7.15. TCP / IP Tunneling
- 7.16. Wi-Fi Scan Result
- 7.17. Device Name Configuration
- 7.18. Switch between Wired and wireless modes
- 7.19. Pair / Share credentials
- 7.20. Multiple SSID
- 7.21. Zone Volume.
- 7.22. Music Services
- 7.23. Telnet
- 8. Appendix
LS6 User Guide
Libre Wireless Technologies User Guide: LS6, Ver. 6.0 Page 47 of 81
Libre Confidential
Ls-Enabled device reboots, every time when it is switched from HN-Mode to
SA-Mode and vice-versa
For information on setting up devices for DDMS, and Using Libre App refer to
LibreWireless-Usability_Guide_Dynamic_Direct_Multi-Node_Streaming
The device webpage provides interface to update DDMS SSID and password.
Figure 7.2-1: DDMS Setup in webpage
7.3. Software Security
LibreSync software is secured using Crypto IC. Crypto IC is embedded either in the LS6
module or the ACP. Crypto IC authenticates and allows only the valid LS6 software to boot
on the LS6 modules.
7.4. Source Switching
LibreSync enables user to switch the playback sources without any hitches. User can choose
to stream music either from AirPlay or UPnP server and the music streams on the selected
device from the source.
For example, A LS Device streaming AirPlay, starts streaming music from DLNA / DMR when,
the user selects music from Win 7 -Media Player to be played on the device.