User's Manual
Table Of Contents
- 1. Introduction
- 2. Libre Wireless Technologies’ EVK
- 3. Firmware Update
- 4. Configuring Non-Volatile-Item
- 5. Key Button Functionality
- 6. Network Configuration
- 7. Features
- 7.1. Libre APP for Android
- 7.2. DDMS
- 7.3. Software Security
- 7.4. Source Switching
- 7.5. Failsafe Mechanism
- 7.6. Autosense of Audio CODEC
- 7.7. AUX-In Support
- 7.8. Airplay®
- 7.9. DLNA ® / DMR
- 7.10. Miracast
- 7.11. SD-Card Playback
- 7.12. i-Device playback over USB
- 7.13. Favourites
- 7.14. USB Playback
- 7.15. TCP / IP Tunneling
- 7.16. Wi-Fi Scan Result
- 7.17. Device Name Configuration
- 7.18. Switch between Wired and wireless modes
- 7.19. Pair / Share credentials
- 7.20. Multiple SSID
- 7.21. Zone Volume.
- 7.22. Music Services
- 7.23. Telnet
- 8. Appendix
LS6 User Guide
Libre Wireless Technologies User Guide: LS6, Ver. 6.0 Page 52 of 81
Libre Confidential
Figure 7.7.1-3: Disable Airplay Password
Device reboots automatically.
End --
7.9. DLNA
®
/ DMR
After the device is configured to the network, device is discoverable over UPnP
®
. Any
Universal Plug and Play (UPnP) / Digital Living Network Alliance (DLNA) certified controller
can be used to stream music to the device.
To test Play To functionality proceed as below
Step 10. Open Media Player on Windows 7
Step 11. In the play list, Click Play To and select the LS enabled speaker or device
Or
Right click on the song and Click Play To
Music starts streaming.
If the speaker / device is not visible on the Windows 7 Media Player, go to Stream > More
streaming options, ensure speaker is in Allowed state.