User's Manual
Table Of Contents
- 1. Introduction
- 2. Libre Wireless Technologies’ EVK
- 3. Firmware Update
- 4. Configuring Non-Volatile-Item
- 5. Key Button Functionality
- 6. Network Configuration
- 7. Features
- 7.1. Libre APP for Android
- 7.2. DDMS
- 7.3. Software Security
- 7.4. Source Switching
- 7.5. Failsafe Mechanism
- 7.6. Autosense of Audio CODEC
- 7.7. AUX-In Support
- 7.8. Airplay®
- 7.9. DLNA ® / DMR
- 7.10. Miracast
- 7.11. SD-Card Playback
- 7.12. i-Device playback over USB
- 7.13. Favourites
- 7.14. USB Playback
- 7.15. TCP / IP Tunneling
- 7.16. Wi-Fi Scan Result
- 7.17. Device Name Configuration
- 7.18. Switch between Wired and wireless modes
- 7.19. Pair / Share credentials
- 7.20. Multiple SSID
- 7.21. Zone Volume.
- 7.22. Music Services
- 7.23. Telnet
- 8. Appendix
LS6 User Guide
Libre Wireless Technologies User Guide: LS6, Ver. 6.0 Page 54 of 81
Libre Confidential
Step 1. Send the type 2 Command in Message-Box 113 over LUCI
For more information see Message 113 in file LibreWirelessTechNote -
LS_Light_Weight_Universal_Control_Interface
Step 2. Start the local audio playback on an Miracast enabled Android Phone
For Example, Nexus 5
Step 3. Go to the Miracast screen, on the Android Phone
For Example, In Nexus 5 phone go to Settings > Display > Cast screen
Miracast enabled speaker is listed. For example, LibreCast
Figure 7.9-1: Miracast Enabled Speaker