User's Manual
Table Of Contents
- 1. Introduction
- 2. Libre Wireless Technologies’ EVK
- 3. Firmware Update
- 4. Configuring Non-Volatile-Item
- 5. Key Button Functionality
- 6. Network Configuration
- 7. Features
- 7.1. Libre APP for Android
- 7.2. DDMS
- 7.3. Software Security
- 7.4. Source Switching
- 7.5. Failsafe Mechanism
- 7.6. Autosense of Audio CODEC
- 7.7. AUX-In Support
- 7.8. Airplay®
- 7.9. DLNA ® / DMR
- 7.10. Miracast
- 7.11. SD-Card Playback
- 7.12. i-Device playback over USB
- 7.13. Favourites
- 7.14. USB Playback
- 7.15. TCP / IP Tunneling
- 7.16. Wi-Fi Scan Result
- 7.17. Device Name Configuration
- 7.18. Switch between Wired and wireless modes
- 7.19. Pair / Share credentials
- 7.20. Multiple SSID
- 7.21. Zone Volume.
- 7.22. Music Services
- 7.23. Telnet
- 8. Appendix
LS6 User Guide
Libre Wireless Technologies User Guide: LS6, Ver. 6.0 Page 56 of 81
Libre Confidential
When Host-MCU is Present (in Customer Product)
If the NV-Item hostpresent is set to '1' ,
To Enable NV-Item hostpresent
#setenv hostpresent 1
To start playback from Apple Device following sequence is to be followed.
Step 1. LS sends the new source to the Host MCU over Message-Box# 10
Step 2. Host MCU may send a command to LS (Command Type: GET) over Message-
Box#50 (Current Source – with value 16 that is Apple Device) to get to know the
current playback source, if any.
Step 3. Host MCU takes a decision whether it has to allow/disallow the new Audio
Source.
Step 4. Send a confirmation on Message-Box#11 with data field set to 1/0 for
Allowed/Not-allowed respectively.
Apple Device Connection Status
When Apple device is connected Message-Box # 38 is updated with the value '2'
When it is disconnected Message-Box # 39 is updated with the value '2'.
For more information refer to LUCI document
LibreWirelessTechNote - LS_Light_Weight_Universal_Control_Interface
7.13. Favourites
Favourites in LibreSync allows you to save your favourite songs and radio stations in Music-
Services (Listed below) for easy access.