User's Manual

LS9 User Guide
Libre Wireless Technologies User Guide: LS9, Ver. 3.3.1 Page 17 of 93
Libre Confidential
The Firmware image should not contain any extensions.
Insert the USB in LS9 EVK
Execute command #netcfg in the device terminal to know the device
IP.
For Example, 10.0.1.13
Enter the IP address in the address bar of your browser.
In Firmware Upgrade section, select Method as USB, and Click
Upgrade.
LS flashes the image onto LS9 module.
Module will reboot on completion of firmware upgrade.
End - -