User's Manual

LS9 User Guide
Libre Wireless Technologies User Guide: LS9, Ver. 3.3.1 Page 18 of 93
Libre Confidential
3.1.3 Firmware Upgrade Using Network Method
• At present firmware upgrade over Ethernet is supported.
• It takes about 2 minutes to complete the upgrade progress.
LS9 module does not support Ethernet port on the module. Hence it is recommended to use
External USB Network adapter, to configure LS9 to Ethernet mode.
LS9 Supports below listed network adapters.
• XR22800 Hi-Speed USB to 10/100 Ethernet Bridge from EXAR
• RTL8150 USB 10/100 Fast Ethernet Adapter from REALTEK
• MAC book USB to Ethernet adapter.
To update the binary file (Application-Image or Single-Image) on the LS9 module, over
network proceed as below.
Make sure the LS9 EVK and your laptop / PC is connected to the
same network.
Share the folder of the binary file (83_IMAGE) to be loaded onto the
LS9 Module.
Make sure your laptop / PC is not password protected and is not
binded to the work domain.
For information on procedure to disable password see below
links