User's Manual

LS9 User Guide
Libre Wireless Technologies User Guide: LS9, Ver. 3.3.1 Page 29 of 93
Libre Confidential
Enter the following URL in the address bar of your browser
192.168.43.1 webpage shows Network status as shown in Figure 6-4.
Select the Access Point (AP) to be connected to from Select Your
Network drop-down list
Select Security Type from Security drop-down list, Enter the valid login
credentials and Click OK
Device disconnects from laptop and connects to the network selected
To know the newly acquired IP execute command #netcfg in the
device terminal
End--
4.2.2 Webpage Method
This method is used if the device is already connected to a network.
To setup wireless network via Webpage proceed as below
Execute command #netcfg in the device terminal to know the device
IP
For Example, 10.0.1.13
Enter the IP in the address bar of your browser with port number
For Example, 10.0.0.1.13, the webpage shows the Network status of
the currently connected Access Point.