User's Manual

LS9 User Guide
Libre Wireless Technologies User Guide: LS9, Ver. 3.3.1 Page 41 of 93
Libre Confidential
5.21. Bluetooth
BT_CONTROLLER NV-Item is used to select the type of board or disable BT functionality in
LS-Modules.
• Setting the value to 0 disables BT functionality
• Setting the value to 1
enables BT functionality (Default)
Use the below syntax to define the BT Controller Functionality.
To Enable Bluetooth
#setenv BT_CONTROLLER <<1>> (Default)
To Disable Bluetooth
#setenv BT_CONTROLLER <<0>>
5.22. BT Device Name
BT_DeviceName NV-Item is used to modify the Bluetooth name of the speaker device. By
default the Bluetooth name for the speaker device is LS_BT_Speaker. The maximum length
of the device name is 20 characters.
Use the below syntax to set the BT Device Name
To Set BT Device Name
#setenv BT_DeviceName <<LS_BT_Speaker>>
5.23. DLNA Connection Close
DLNA_ConnClosed NV-Item is used to enable / disable the time gap between play-pause
trigger.
• Setting DLNA_ConnClosed to ‘0’ will trigger Play-Pause instantaneously.
• Setting DLNA_ConnClosed to ‘1’ will provide a time g
ap (negligible) between
Play-Pause trigger.