User's Manual

LS9 User Guide

Libre Wireless Technologies User Guide: LS9, Ver. 3.3.1 Page 58 of 93

Libre Confidential

Switching to Wired Mode

To switch to wired mode from Wi-Fi mode proceed as below

Make Sure device is connected to an Wi-Fi Network

Execute command #netcfg in the device terminal to know the device

For Example, 10.0.1.13

Enter the IP in the address bar of your browser.

For Example, 10.0.1.13

In Select Your Network drop-down list, select Switch to Wired mode

Figure 6.11-1: Switch to Wired Mode

Connect the device with an Ethernet cable