User's Manual

LS9 User Guide
Libre Wireless Technologies User Guide: LS9, Ver. 3.3.1 Page 62 of 93
Libre Confidential
Figure 6.14-1: Device Name Section
• The device name length can be up-to maximum of 50
characters.
• After the Firmware upgrade, if the device friendly name is not set, the
device name is listed as below
- iTunes server and DMR Speakers lists the device as
LibreSync_xxxxxx
End--
6.15. Switch between Wired and wireless modes
You can switch between wired and wireless mode using the Webserver
Switching to Wired Mode
To switch to wired mode from Wi-Fi mode proceed as below
Make Sure device is connected to an Wi-Fi Network
Execute command #netcfg in the device terminal to know the device
IP
For Example, 10.0.1.13
Enter the IP in the address bar of your browser with port number
For Example, 10.0.1.13
In Select Your Network drop-down list, select Switch to Wired mode