User's Manual

LS9 User Guide
Libre Wireless Technologies User Guide: LS9, Ver. 3.3.1 Page 63 of 93
Libre Confidential
Figure 6.15-1: Switch to Wired Mode
Connect the device with an Ethernet cable
Click Save
LS module reboots automatically
End--
Switching to Wireless Mode
To switch to wired mode from Wi-Fi mode proceed as below
Execute command #netcfg in the device terminal to know the device
IP
For Example, 192.168.0.103
Enter the IP in the address bar of your browser with port number
For Example, 192.168.0.103
In Select Your Network drop-down list, select Switch to Wi-Fi mode
and Click Save