User's Manual

Librestream Onsight 1000/2000/2500 User Manual Getting Started
1.8 User Interface Features
1.8.1 Viewfinder
The display on the back of the Onsight device functions as a camera viewfinder. By default, it shows what the
lens at the front of the Onsight device is viewing, but it can also provide status information and menus. Depending
on the display mode, the Viewfinder uses a status bar, icons, and popup windows to provide information,
notifications, and prompts as necessary.
Important: When you are using the Viewfinder screen, always use the stylus provided. Do not use other objects,
as this could damage the Viewfinder screen. Tap the screen lightly. Do not press hard or strike the screen.
For further information on the Viewfinder features and display modes, see section 4, Viewfinder Features &
D
isplay Modes, on page 30.
1.8.2 Soft Keys
Some scre
ens contain on-screen keys or buttons, e.g., Accept or Cancel on a configuration screen. You can
select these by tapping them with your stylus, or by pressing Navigation pad keys.
All references to “select” refer to pressing the appropriate Navigation pad key
(button) or tapping the screen element/icon with the stylus.
1.8.3 Icons
Some option
s or operating conditions cause notification icons to appear on the screen. Many of the icons are
touch sensitive – tap the icon with the stylus to view a pop-up message or status screen. Tap the status screen
again to dismiss the message.
Viewfinder icons provide status information and other notifications.
For example, tapping the Power icon
will provide a Status screen showing more detailed power and battery
status. Tap the Status screen again or press the Display button
to dismiss the message.
11