User's Manual

Librestream Onsight 1000/2000/2500 User Manual Onsight Device Basic Operation
2.2.1 Onsight 1000 Battery Replacement
Î To insert or replace the Onsight 1000 battery:
1. Ensure the device is powered off before proceeding. See paragraph 2.4, Turning Power On or Off, on page
21 for instructions.
2.
Open the battery compartment and insert the battery until it clicks into place and is flush. It only fits one way.
3. Close the battery door as follows:
x Ensure the lock switch is in the unlocked position.
Locked
ƒ
Unlocked
x Orient the battery door so it is flat against the battery well, but with approximately a 3mm gap.
Gap
x
Slide the door toward the center of the unit until it is fully closed.
x Slide the lock switch to the locked position.
4. Connect the Onsight 1000 to the external power adapter and charge the battery until the orange LED turns off
(up to 8 hours).
18