User's Manual

Librestream Onsight 1000/2000/2500 User Manual
The device will not operate on the external adapter alone. You must have a
battery installed.
2.2.2 Onsight 2000/2500 Battery Replacement
Before opening the Onsight 2000Ex/2500Ex battery cover, you
must read the Onsight 2000/2500 Regulatory and Safety Guide.
If an SD memory card needs to be inserted or replaced, it is best to do it at this
time, prior to installing the battery. See paragraph 2.6.2 on page 25 for
instru
ctions on how to remove and replace an SD memory card.
Î To insert or replace the Onsight 2000/2500 battery:
1. Ensure the device is powered off before proceeding. See paragraph 2.4, Turning Power On or Off, on page
21 for instructions.
2.
Open the battery compartment door using the stylus screwdriver.
Battery door thumb scre
w
3. If the battery is being replaced, remove the old battery by sliding the battery back towards the end of the
battery compartment and then lifting out the battery.
19