User's Manual

Librestream Onsight 1000/2000/2500 User Manual Answering & Initiating Calls
3 Answering & Initiating Calls
The Onsight device operator can either:
x call an Onsight Expert user, or
x answer an incoming call from an Onsight Expert user.
Use the Send and End buttons on the Navigation pad to start and end calls, similar to the keys on a mobile
phone. Once a call is established, you can collaborate using voice, video, audio, images and annotations.
Note that Onsight Expert can initiate a conference call with other Onsight Expert users so that the Onsight device
can collaborate with multiple experts.
In order to participate in a call, all participants must have the same encryption
setting. The encryption setting of the person initiating the call must be used by
all other call participants. The Encryption Mode is set in the Main Menu >
Configuration > Security > Encryption screen. See paragraph 6.5,
Configuration, on page 59.
3.1 Network Access
Before you can answer or initiate a call, you must be able to communicate with the network, either through a
direct wired connection, or wireless connection. The Network link indicator
,
the middle of the three indicators
on the top of the Onsight device, indicates whether or not a Network link exists.
If a connection is required from a hotspot/guest network that requires browser access, go to the Main Menu >
Configuration > Network > Hotspot Login screen. A successful login will result in the display of the Librestream
welcome page. See paragraph 6.5, Configuration, on page 59.
Î To check current wireless network conditions:
1. Press the Display button once
and check the Session information at the bottom of the Viewfinder.
2. Another option is to press the Display button three times to display the Main Menu. Tap the Status Menu
option with the stylus, and then select Network Status.
See page 30 for more information on the Viewfinder Features & Display Modes.
26